...

Incoterms for Air Freight: Why FCA Replaces FOB

Air freight should use Incoterms 2020 rules for any mode, such as FCA, CPT, CIP, DAP or DDP; FOB, FAS, CFR and CIF are sea-only rules.

“FOB” is still the most common term on purchase orders, including orders that ship by air. It usually works until something goes wrong: damage at the origin airport, a dispute over who pays terminal charges, or an insurance claim that falls in a gap. Choosing the right rule before you book your air freight avoids those disputes. If you need the basics first, start with what is an Incoterm.

Key takeaways

  1. Incoterms 2020 has seven rules for any mode of transport (EXW, FCA, CPT, CIP, DAP, DPU, DDP) and four for sea and inland waterway only (FAS, FOB, CFR, CIF).
  2. FCA is the air equivalent of FOB: the seller clears export and hands the goods to the buyer’s carrier at a named place.
  3. CPT and CIP replace CFR and CIF; under CIP the seller must buy all-risks cover at Institute Cargo Clauses (A) level.

Why FOB, CFR and CIF do not fit air freight

Under FOB, CFR and CIF, the seller delivers the goods by placing them on board a vessel, and risk passes at that moment. In air freight there is no vessel and the shipper never sees the aircraft. The seller hands the cargo to a forwarder or airline at a terminal, sometimes days before the flight, and the goods sit in a facility the seller does not control.

That creates three problems with “FOB air freight”:

  • Risk gap: if cargo is damaged at the origin terminal, before loading, the contract does not clearly say who bears the loss.
  • Cost disputes: origin terminal handling, screening and export documentation charges are not clearly allocated.
  • Insurance mismatch: a policy written around a vessel loading point may not respond to a loss at an air terminal.

The ICC, which publishes the rules, states on its Incoterms 2020 page that CIF is reserved for maritime trade. The same logic applies to FOB, FAS and CFR. When a supplier quotes “FOB Shanghai” for an air shipment, what they almost always mean is FCA at their premises or at the origin airport.

One more source of confusion: in U.S. domestic trade, “FOB shipping point” and “FOB destination” are commercial terms under state law, not Incoterms rules. They describe title and freight payment between U.S. parties. Our guide to what FOB means in freight covers both uses.

Incoterms 2020 rules for air freight: who pays and when risk transfers

The table summarizes the rules that fit air shipments, plus the sea-only rules for contrast. “Main carriage” is the international flight.

RuleRisk passes to buyerMain carriage paid byExport clearanceImport clearance and dutiesFit for air
EXWGoods made available at seller’s premises, not loadedBuyerBuyerBuyerWorks, but buyer handles export abroad
FCAGoods delivered to buyer’s carrier at named place (loaded if at seller’s premises)BuyerSellerBuyerBest fit when buyer controls freight
CPTGoods handed to the first carrierSellerSellerBuyerGood; replaces CFR
CIPGoods handed to the first carrierSeller, plus insuranceSellerBuyerGood; replaces CIF
DAPAt named destination, ready for unloadingSellerSellerBuyerGood for door delivery
DPUAt named destination, once unloadedSellerSellerBuyerRare in air
DDPAt named destination, ready for unloadingSellerSellerSellerUse with care
FAS, FOB, CFR, CIFAlongside or on board a vesselVariesSellerBuyerSea and inland waterway only

Two details matter under CPT and CIP. Risk passes when the seller hands the goods to the first carrier, even though the seller pays for the flight. So the buyer carries the transit risk on a shipment the seller booked, which is why CIP includes insurance and why buyers under CPT often buy their own.

FCA for air freight: the rule to use instead of FOB

FCA (Free Carrier) is the rule most U.S. importers want. The seller clears the goods for export and delivers them to the carrier the buyer nominates, at a named place. That place can be:

  • The seller’s premises: delivery happens when the goods are loaded onto the buyer’s pickup truck. This is the cleanest option, since the forwarder’s pickup driver takes over from the seller’s dock.
  • The origin airport or the forwarder’s terminal: delivery happens when the goods arrive there, ready for unloading. The seller pays for the truck to the airport but does not unload.

Always name the place precisely, for example “FCA seller’s factory, full street address, Incoterms 2020”, not just a city. Under FCA the buyer controls routing, flight choice, cost and tracking, and the seller still handles export formalities in its own country. That split fits air well. Our air freight import guide shows where FCA sits in the full import sequence.

FCA and letters of credit

An air waybill is not a document of title, so it cannot be used to transfer ownership the way a negotiable ocean bill of lading can. If you pay by letter of credit, align the bank’s document requirements with the air waybill as issued; see what is an air waybill.

CIP, DAP and DDP: when the seller books the flight

Sometimes the seller controls freight, either because it has better rates or because the buyer prefers a delivered price.

CIP

Under Incoterms 2020, the seller under CIP must buy insurance that complies with Institute Cargo Clauses (A), the all-risks level, for at least 110% of the contract value. That is higher than the minimum cover required under CIF. For buyers, CIP is a safer delivered-to-airport term than CPT. If you buy CPT or FCA and want your own cover, ExFreight offers optional all-risk cargo insurance at booking, based on cargo value plus freight plus 10%.

DAP and DPU

DAP delivers to the named destination, ready for unloading, and the buyer clears import and pays duties. It is common on small B2B air shipments; ExFreight’s international small parcel bookings default to DAP. DPU adds unloading by the seller and is rarely used for air.

DDP

DDP puts import clearance, duties and taxes on the seller. For U.S. imports, that means the foreign seller acts as importer of record and must meet CBP requirements for nonresident importers, including a customs bond. Buyers should confirm the seller can actually do this, because a stalled DDP entry still holds the buyer’s goods.

Why EXW is a weak choice for air imports

EXW looks attractive to sellers because they do almost nothing: the buyer collects the goods at the seller’s door, unloaded. But under EXW the buyer is responsible for export clearance in the seller’s country, and in many countries a foreign buyer cannot file the export declaration itself. The seller then has to provide data or file anyway, outside the contract. The seller also has no obligation to load the truck. FCA at the seller’s premises fixes both problems with almost no extra cost to the seller, which is why the ICC itself suggests FCA for many trades that use EXW.

Choosing the right rule for your air shipment

  • U.S. importer that wants control of cost and transit: FCA at the supplier’s door.
  • U.S. importer buying a delivered price: CIP to the destination airport, or DAP to your door; avoid DDP unless the seller is set up as a U.S. importer.
  • U.S. exporter selling to a buyer with its own forwarder: FCA at your premises.
  • U.S. exporter offering delivered pricing: CPT or CIP for airport delivery, DAP for door delivery. On ExFreight door-to-door and door-to-port export rates, the export declaration filing is included once you submit the SLI or export data at booking.

Whatever rule you pick, write “Incoterms 2020” after it in the contract and invoice. Without the version, the parties can argue over which edition applies.

Book on FCA terms from your supplier’s doorGet instant door-to-door air rates from over 150 countries.
Get a Free Quote

Frequently asked questions

Can you use FOB for air freight?

You can write it, but it is a misuse. Under Incoterms 2020, FOB applies only to sea and inland waterway transport, because delivery happens on board a vessel. For air shipments, use FCA at the seller's premises or origin airport. It allocates export clearance, terminal costs and risk clearly before the cargo reaches the aircraft.

What is the air freight equivalent of FOB?

FCA, or Free Carrier, is the air freight equivalent of FOB. The seller clears the goods for export and delivers them to the buyer's nominated carrier at a named place, such as the seller's premises or the origin airport. The buyer then pays for and controls the international flight and destination costs.

Which Incoterms are used for air freight?

Seven Incoterms 2020 rules work for air freight because they apply to any mode: EXW, FCA, CPT, CIP, DAP, DPU and DDP. In practice, FCA, CPT, CIP and DAP are the most common for air. FOB, FAS, CFR and CIF are reserved for sea and inland waterway shipments and should be avoided.

What is the difference between CIF and CIP for air freight?

CIF is a sea-only rule with risk passing on board the vessel and minimum insurance cover. CIP works for air and any mode, with risk passing when the goods are handed to the first carrier. Under Incoterms 2020, CIP requires the seller to buy all-risks cover under Institute Cargo Clauses (A).

Who pays customs duties under FCA air freight?

Under FCA, the seller pays export clearance in the origin country, and the buyer pays import clearance, duties, taxes and fees at destination. For a U.S. importer, that means duties, the merchandise processing fee and any customs bond are on the buyer, along with the international flight and destination delivery.

Written by

ExFreight Team

ExFreight’s logistics experts with 15+ years of experience in freight forwarding from China to over 150 countries worldwide.

Published November 15, 2026
Tags

Table of Contents

Get a Free Quote

Smarter logistics start here.
Expert support for every shipment.

Related Articles

Scroll to Top
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.