Air freight packaging is how cargo is packed, palletized and labeled to fit aircraft unit load devices, survive handling, pass screening and bill at the lowest chargeable weight.
Packaging decides three things on every air shipment: whether the airline accepts it, whether it arrives intact and how much you pay. Good packing for an ocean container is not always good packing for an aircraft. Air cargo is built onto pallets and containers shaped to the fuselage, moved by forklifts and roller decks several times per trip, and charged by volume as much as by weight. This guide covers the air-specific rules; for general export packing practice across modes, see our international packaging requirements. When you are ready to ship, ExFreight air freight rates every option from your dimensions and weight.
Key takeaways
- Airlines bill the greater of actual weight and volumetric weight (length x width x height in cm divided by 6,000), so empty space in a box is paid for as freight.
- Freight that can be stacked fills the aircraft efficiently; non-stackable freight is often charged for the full height of the position it blocks.
- Solid wood pallets and crates crossing borders must be heat-treated or fumigated and carry the ISPM-15 mark, or they can be refused entry.
How air cargo is built: ULDs, pallets and contours
Airlines do not load loose boxes one by one into a wide-body aircraft. Ground handlers build cargo onto unit load devices (ULDs), which are aluminum pallets netted over the cargo or rigid containers, and lock them into the aircraft’s floor. IATA sets the standards for these devices through its ULD program. Your packaging has to fit within a ULD’s footprint and its height contour, which tapers to match the curve of the fuselage.
| ULD type | Base dimensions | Typical position | What it means for your freight |
|---|---|---|---|
| PMC / P6P pallet | 96 x 125 in (244 x 318 cm) | Main deck or lower deck of wide-bodies | Lower-deck builds are limited to about 64 in (163 cm) high |
| PAG / P1P pallet | 88 x 125 in (224 x 318 cm) | Main deck or lower deck of wide-bodies | Same height limits as the PMC, on a narrower base |
| AKE (LD3) container | 61.5 x 60.4 in base, 64 in high | Lower deck of wide-bodies | About 150 cubic feet; fits cartons, not standard pallets |
| Main deck on freighters | Full pallet positions | All-cargo aircraft | Builds can reach about 96 to 118 in (244 to 300 cm), depending on aircraft and position |
These figures are industry norms; each airline publishes its own limits by aircraft type. Height is the constraint shippers hit most often. A pallet over roughly 63 inches can only fly in the main deck of a freighter or a combi aircraft, which narrows the flights available. Our guides to air freight pallet sizes and pallet height restrictions go deeper on the numbers.
Volumetric weight: why box size changes the bill
Air freight is priced on chargeable weight, the greater of actual gross weight and volumetric (dimensional) weight. The IATA standard volumetric divisor is 6,000 cubic centimeters per kilogram, which is the same as 166 cubic inches per pound or 1 cubic meter = 167 kg.
Example: a standard 48 x 40 in pallet built 60 inches high measures 115,200 cubic inches. Divided by 166, it has a volumetric weight of 694 lb. If the pallet only weighs 400 lb, you pay for 694 lb. Cut the build to 45 inches by stacking cartons more tightly and the volumetric weight falls to 520 lb, a 25% reduction in billable weight with the same goods.
Ways to lower chargeable weight:
- Right-size cartons to the product. Void fill is billed as freight.
- Build pallets to a flat, square top. Pyramid-shaped loads are measured at their highest point.
- Avoid oversized pallets for small loads; a 40 x 48 base costs the same footprint whether it carries one carton or forty.
- Measure the finished pallet, including the base and any overhang, before booking. Airlines re-measure at acceptance.
For worked formulas by unit, see how to calculate chargeable weight for air freight.
Building a pallet that flies well
Air cargo is handled more often than most ocean cargo: picked up, cross-docked, screened, built onto a ULD, broken down at destination and delivered. Pack for that:
- Use a sound pallet and keep cartons within its edges. Overhang crushes carton corners and makes the piece harder to fit on a ULD.
- Stack heavy cartons at the bottom, interlock layers like brickwork and keep the top flat.
- Add edge protectors on all vertical corners and strap or band the load to the pallet.
- Stretch-wrap from the pallet base to the top so the load and the pallet move as one unit.
- Mark the weight and dimensions on the piece, and keep floor loading in mind: very dense items such as machinery may need a skid or spreader base to spread weight across the aircraft floor.
Packaging also has to pass security screening. Cargo for passenger aircraft is screened by X-ray, explosives trace detection or physical inspection, and dense, opaque packing can force a handler to break down the build to inspect it. Wrapping that can be opened and re-sealed, clear labeling of contents and a packing list attached to the lead piece speed that process and reduce the risk of missing a flight.
Stackability is a cost decision as much as a safety one. A pallet marked “do not stack” blocks the space above it, and many airlines charge non-stackable freight as if it filled the position to the ULD height limit. If your product can carry weight, a flat top and a sturdy top sheet let the handler build over it and keep your rate down. If it cannot, say so at booking so the quote reflects it.
ISPM-15: wood pallets and crates
Solid wood packaging, including pallets, crates, skids and dunnage, must meet the international standard ISPM-15 for most international shipments, by air as well as ocean. In the U.S., the rule is set out in 7 CFR 319.40-3: imported wood packaging must be debarked, heat-treated (HT) or fumigated with methyl bromide (MB), and stamped with the IPPC mark showing the country code, the treatment facility number and the treatment code.
Manufactured wood such as plywood, oriented strand board and particle board is not covered, because the manufacturing process already kills pests. Plastic and corrugated pallets are also outside the rule and are often lighter, which helps chargeable weight on smaller loads.
Wood packaging without a legible ISPM-15 mark, or with signs of live pests, can be ordered re-exported at the importer’s cost, together with the cargo it holds. Check the stamp on every pallet before you build the shipment, including pallets supplied by your vendor.
Labels and marks on air freight
Every piece must be identifiable on its own if it gets separated from the rest of the shipment. At a minimum, mark each piece with:
- Shipper and consignee names and addresses.
- The air waybill or house air waybill number and the piece count, such as 3 of 8, usually on a forwarder’s barcode label.
- Orientation arrows for anything that must stay upright, and handling marks such as fragile or keep dry where relevant.
- Gross weight for heavy pieces, so handlers choose the right equipment.
Remove or cover old labels and barcodes from reused cartons. A stale barcode can route a piece to the wrong flight. Dangerous goods add strict marking and labeling rules covered in our guides to dangerous goods and lithium batteries. Finally, packaging quality affects claims: cargo insurers and carriers look at how freight was packed when they assess damage, and ExFreight’s optional cargo insurance must be bought at booking, before pickup.
Frequently asked questions
How should I pack items for air freight?
Use sturdy, right-sized cartons, stack them heavy-side down on a sound pallet with no overhang, add corner protectors, band and stretch-wrap the load, and keep the top flat so it can be stacked. Label every piece with the air waybill number and piece count, and measure the finished pallet before booking.
What is the maximum pallet height for air freight?
It depends on the aircraft and position. Lower-deck positions on wide-body passenger aircraft are limited to about 64 inches (163 cm). Main-deck positions on freighters can take builds of about 96 to 118 inches (244 to 300 cm). Each airline publishes exact limits by aircraft type.
How is volumetric weight calculated for air freight?
Multiply length, width and height in centimeters and divide by 6,000 to get kilograms, or multiply in inches and divide by 166 to get pounds. Airlines charge the greater of volumetric and actual weight. A 48 x 40 x 60 inch pallet has a volumetric weight of about 694 pounds.
Do wooden pallets need ISPM-15 for air freight?
Yes. ISPM-15 applies to solid wood packaging on international shipments regardless of mode. Pallets and crates must be heat-treated or fumigated and carry the IPPC mark. Plywood, OSB and particle board are exempt, as are plastic and corrugated pallets. Unmarked wood can be re-exported at the importer's cost.
Does non-stackable freight cost more by air?
Often, yes. A pallet that cannot carry weight on top blocks the space above it, and many airlines charge it as if it filled the position to the ULD height limit. Building a flat, sturdy top that can carry other freight usually lowers the chargeable weight and widens the flights available.




